Strong 105 L Handpiece Ball Bearing Set

Specifications:

• Brand: SAESHIN
• 1 set/4 pcs ball bearings for Strong 105L or Strong 120 handpieces.

Please note – there are two types of sets.
Type 1 set: ball bearings 1480, 1260, 940, 830
Type 2 set: ball bearings 1480, 1260, 1040, 830
Please specify the type of set in the comments when ordering.

Replacing ball bearings:

1. Disassemble the cap and  spindle assembly from the front part of the handpiece.
2. Remove the C-clip from the front chuck housing. Ball bearings and other supporting parts can now be removed.
3. Assemble supporting parts and replace ball bearings. Install components in reverse order of removal. Install C-clip retainer into chuck housing.
4. Assemble the hand cap and spindle assembly.
5. Run the handpiece under a no-load state and confirm proper functionality. Your handpiece is now ready for use.